Prewitt 霍尔磁梯度张量系统结构设计
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TH89 TP212. 9

基金项目:

十三五国家重点研发计划(2016YFB1200602- 40)项目资助


Structure design of Prewitt hall magnetic gradient tensor system
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为实现高速磁浮轨道长定子行波主漏磁场小空间、mT 量级磁梯度张量的准确测量,将图像边缘检测领域的 Prewitt 梯 度算子进行实例化,设计了一种由 8 只霍尔磁敏传感器构成的小体积、低成本的磁梯度张量测量结构。 通过空间冗余的手段, 克服了霍尔磁敏传感器零点偏移大,灵敏度一致性差的特点,也为传统磁梯度张量测量系统传感器的空间布局提供了一种新的 思路。 实验结果表明,相对传统十字形、正方形结构,Prewitt 结构可将多传感器上述两种参数不一致导致的测量误差分别减小 至原来的-10. 4% 和 58. 1% ,有效降低了测量系统对传感器参数一致性的要求,避免了复杂高成本的三轴传感器标定与误差校 正环节。

    Abstract:

    To realize the accurate measurement of mT magnitude magnetic gradient tensor in small space for traveling wave main magnetic flux leakage of high-speed maglev track stator, the Prewitt gradient operator of image edge detection is instantiated. A small volume and low-cost Hall magnetic gradient tensor measurement structure including 8 Hall magnetic sensors is designed. It overcomes the characteristics of large zero drift and poor sensitivity consistency of the Hall magnetic sensor by spatial redundancy, which provides a new way for sensors spatial layout design of the magnetic gradient tensor system. Compared with the traditional cross and square structure, experimental results show that the Prewitt structure can reduce the measurement error caused by the inconsistency of the above two parameters of multi-sensors to - 10. 4% and 58. 1% . The requirements of the measurement system for the consistency of sensor parameters is effectively reduced, and the complex and high-cost calibration of the three-axis sensor and error correction are avoided.

    参考文献
    相似文献
    引证文献
引用本文

张云洲,吴峻. Prewitt 霍尔磁梯度张量系统结构设计[J].仪器仪表学报,2021,(9):115-123

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2023-06-28
  • 出版日期: