基于孤立波的杨氏模量无损检测换能器研究
DOI:
作者:
作者单位:

西北工业大学自动化学院西安710072

作者简介:

通讯作者:

中图分类号:

TH73

基金项目:


HNSWs based transducers in measuring Young’s modulus nondestructively
Author:
Affiliation:

School of Automation, Northwestern Polytechnical University, Xi′an 710072, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于高度非线性孤立波的基本原理,设计了3个相同的采用PZT压电薄片作为压力传感器的换能器,并将换能器应用到无损检测中,测量了铁氟龙、花岗岩和不锈钢3种材料样本的杨氏模量值。测量结果显示非线性孤立波的特性与被测材料的弹性性质紧密相关。在对样本的100次测量结果中,3个换能器之间的偏差率仅为0.5%,单个换能器的测量结果的标准偏差与均值比低于0.4%,表明不同换能器之间的一致性、单个换能器的可重复性高。换能器测量得到的样本杨氏模量值与理论参数间的偏差率均低于3%,验证了换能器测量结果的可靠性。通过对比超声脉冲速度检测方法,进一步验证了换能器的经济适用性和测量结果的可靠性。

    Abstract:

    Based on the fundamental theory of highly nonlinear solitary waves (HNSWs), three transducers embedded with PZT circular materials are investigated, and designed for the nondestructive testing (NDT) of the Young’s Modulus of materials. Three different materials, including Teflon, granite and stainless steel, are tested by the transducers. The testing results show that the differences among transducers are below 0.5%, and the ratio between standard deviation and average value for single transducer is below 0.4%, which proves the high consistency and repeatability of the three transducers. The deviations from the theoretical analysis and the three materials are below 3%, which confirms the accuracy and reliability of the transducers. By comparing the results of Ultrasonic Pulse Velocity method, the HNSWs based transducers are more affordable, accurate and reliable.

    参考文献
    相似文献
    引证文献
引用本文

邓雯,杨建华,张扬.基于孤立波的杨氏模量无损检测换能器研究[J].仪器仪表学报,2017,38(11):2762-2768

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-12-23
  • 出版日期: